All about Garbage Disposal Troubleshooting

No matter how cleverly you operate the garbage disposal there comes the time when they start showing problems. Although garbage disposal is a hassle-free machine yet some time people encounter the problem of it getting jammed, clogged or leaking at joints. For these troubles, we came up with garbage disposal troubleshooting to make your garbage disposal functional all over again. For the convenience of people using garbage disposal there is a reset button which can help eradicate a lot of problems, but if your trouble persists you can ponder upon the points below and let your machine become the best garbage disposal again.

A. When it’s not working: If your garbage disposal is not working use the rest button immediately. If the problem persists, there could be chances that it is not receiving the power. Look out whether the circuit breaker is working properly or not. Maybe you need to reset it rather than the garbage disposal.

best garbage disposal

B. When it is jammed: If the machine is working but not disposing of the garbage, there could be chances of it getting jammed. Follow the steps to clear it:

  1.  Unplug the circuit breaker.
  2. Look for the hex-shaped hole at the bottom of the disposal. Take a 1/4 inch hex wrench and move it back and forth many times to free the impellers jamming the disposal. In the absence of hex hole, broom stick can be used for the purpose.
  3. If there is metal, rubber or any fibrous food jamming the garbage disposal, use tongs for removing it. Never use your hands.

For more cleaning, you can remove the disposal to clear the jam completely.

C. When it is not grinding the garbage properly: Make sure that your water supply is enough for grinding the garbage off. Another possible reason could be the broken blades of the grinder. You need to replace the entire unit if such thing prevails.

D. When it is clogged: Clogged garbage disposal means there is a something wrong in the drain pipe under the sink. This is when you need a plumber to operate your drain pipe. He would dismantle it and use an auger to clean the clog so that machine can work all over again.

E. When it is leaking: The most annoying situation arises when the garbage disposal machine starts leaking. You need to carefully examine the point from where it is leaking and had to tighten the connection from the point of leakage. Maybe it’s time to replace the drain gasket to stop the leakage.

These are some of the garbage disposal troubleshooting which could help you get rid of problems encountered while operating the machinery. If these solutions didn’t work out maybe it’s time you need to replace your whole garbage disposal unit.

Sharing is caring!